| Customization: | Available |
|---|---|
| Rated Current: | 16A/32A |
| Product Name: | Tinned Copper Wire Black Plastic Housing Molex3.0 |
|
Still deciding? Get samples of US$ 20/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
Product Name
|
Power Cord
|
|
Material
|
PVC cable jacket and pure copper conductor
|
|
Male Plug
|
NEMA 5-20P plug
|
|
Female End
|
stripped
|
|
Rated Voltage/ Current
|
125V 20A
|
Product Characteristics
1.Concise and flowing appearance , comfortable handle , safe and convenient operation.
2.Our EV-charger meets IEC 62196-2 standard.
3.Insulation resistance can reach more than 500MΩ.
4.EV-charger cabling are used in electric vehicle charging , suitable for charging in mode 3.
5.Low temperature rise: the standard requirement is less than 50K.
6.Good electrical performance.
Caution ! ! !
1.Don't step on, fold or knot the cable.
2.Don't drop the EV charging box or place a heavy object on it.
3.Don't place the charging cable near high temperature object when charging.
4.Don't operate the EVSE in temperatures beyond its operating range of -25°C to 55C.
5. Power-supply side input cable should be at least 3*2.5mm (recommended 3*4mm), with a standard.
16A socket. It is suggested that the power distribution is done by the professionals.
6.Don't put fingers into the charging connector when the power plug is still connecting to the power.
7.Don't use this EV charger when the cable is damaged.
8.Don't use this device with an extension cord or adaptor.
){kind=link}